Category Archives: Technology and Society

Fixing My Own Stuff

I think that this comment on my furnace problems is worth elaborating on:

If you blow yourself up trying to save a few bucks by not hiring someone to do this for you, I don’t want to hear any complaints! Good luck.

It’s not (just) about “saving a few bucks.”

I come from a line of people on my mother’s side who would never think to call someone to fix something that had an obvious solution, and the tools/knowledge to do it. In fact, during the Depression, my grandfather was the guy who got called, doing auto repairs. But he also built his own cabin in northern Michigan on the Muskegon River, and built by hand inboard-motor boats to put in the river, by steaming and bending mahogany, and adapting Chrysler drive trains to put in them, including dashboard instruments. He built them in the basement in northern Flint, and knocked out the wall to get them out when they were complete and ready to be trailered Up North.

My uncle (his son) followed in his footsteps, except that he actually got a college degree (ME from Michigan), and he always (at least until late in life), though he was a well-paid engineering manager at AC Spark Plug, rebuilt his own car engines (back in the days when this had to be done every hundred-thousand miles or so), and his own plumbing and electrical work and drywall (at least after he retired).

My first car, at sixteen, was a used MGA. That summer, I tore it apart and put it back together, to improve the performance and end the blue smoke of the burning oil coming out of the tailpipe, and get smoother gear shifting with new synchros. Before I went to college, I was a professional VW mechanic. I’m just not by nature someone who likes to pay people (and in many cases, trust them) to do things that I think I can do better and cheaper myself. When I was in Florida in May, starting to prepare the house to sell, I got a quote of $500 to replace a leaking hose bib, which involved opening up a block wall, sweating in new copper pipe, then resealing and repainting it. I did the whole job in a couple hours after fifty bucks in tools and parts at Home Depot.

A few weeks ago we had a water leak in the main supply line coming into the house that had the meter swirling like a dervish. We did call a plumber, but a thousand dollars later, while they did a good job (I watched), I regretted not doing it myself. All it would have taken was renting a jack hammer to open up the sidewalk, digging some dirt, cutting out the bad pipe and replacing it, reburying, and replacing the pavement.

Anyway, I assumed that when a furnace failed suddenly, it was likely something simple. I read the service manual, tracked down the problem to an obviously failed igniter, and changed it myself. I have pride in my own ability, and a larger bank account.

Swiss Space Systems

They’ve gone belly up, but this is bizarre:

The news comes at the end of a difficult year for S3.

In August its founder and CEO, Pascal Jaussi, was left seriously injured after being beaten up and set on fire by two attackers in a forest.

The media reported at the time that Jaussi was forced to drive his car into a forest, where he was doused in petrol and set on fire. He managed to get himself out of the vehicle and call a friend, who alerted emergency services.

The investigation is ongoing.

The space business can be dangerous, but I’d sure like to know the back story here.

Baby It’s Cold Outside

I know I shouldn’t complain in southern California, considering how brutally cold it is back east, but we woke up this morning to a 63-degree house, and listening to a struggling furnace on the morning after the coldest night of the season to date. The blower seems to be on the fritz.

On a Sunday.

I had other plans today, but I’m going to have to take it apart, and see if I can fix it. It’s twelve years old. Hoping it’s just a bad capacitor. I doubt I’d be able to find a replacement motor today.

[Update a few minutes later]

Not really complaining, and have no right to. If we were back east right now, this would be life threatening, and we’d either have to get an emergency HVAC guy in, or find somewhere else to stay, but for us, it’s just an inconvenience. Worst case is extra blankets tonight, and I’ll find a replacement motor (or limit switch, or whatever the problem is) tomorrow.

But it’s also a reminder of how thin the veneer of modern technology can be, and that nature is not our friend. Whatever the climate is doing (and anyone who claims they can confidently predict it out decades is either fooling themselves, or attempting to fool us), we have to maintain enough societal wealth to deal with it. The policies promulgated by those who insist we can control the climate would have the opposite effect.

[Monday-morning update]

When we woke up this morning, temp in the house was 61 F. A couple hours later, it’s down to 60. It will probably warm up when the sun gets higher, but high temp today is only predicted to be 67.

In troubleshooting, I’ve learned two things: 1) Modern gas furnaces are complicated as copulation and 2) the burner isn’t lighting, which is why the blower motor isn’t bothering to. The status light isn’t flashing any of the error codes in the manual, just steady on, the way it’s supposed to if everything is copacetic, so it’s not useful for diagnostics. I’m suspecting the gas valve (a problem with which the control board would be unaware), but not sure how to tell if it’s working. Could also be the igniter, except I’d think I’d at least momentarily smell gas if that were the problem. Anyway, I’ve got to go start poking at things with a VOM.

[Update a few minutes later]

OK, I am briefly smelling gas when it tries to start up, so the valve seems to be working. Now suspecting igniter:

1. Remove burner compartment door to gain access to the ignitor.
2. Disconnect the ignitor from the Ignition Control.
3. Using an ohmmeter measure the resistance of the ignitor.
4. Ignitor cool should read between 40 to 75 ohms.
5. Reconnect ignitor.
6. Place unit in heating cycle, measure current draw of ignitor during preheat cycle. Should read approximately 4 to 4.5 amps.
7. If ignitor is receiving 115 Volts and will not light, replace.
8. After check and/or replacement of hot surface ignitor, reinstall burner compartment door and verify proper unit operation.

Supposed to be 40-75 ohmns, showing infinite. That seems like the problem. Looks like they’re about $20. Now to go out and find one.

[Update a while later]

OK, a replacement (and improved version) was $42 bucks. The old one had clearly failed; you could see the burn through in the element that had opened it up. It probably got hit by a piece of dust or something when it was hot. House is now warming up.

[Update a while later]

Temp is up to 64 degrees and rising. In retrospect, I would have saved time if I’d relied on Occam: If something isn’t igniting, first check to see if there’s ignition.

Further thoughts: Pilotless ignition saves fuel, and is probably more reliable, but if a pilot blows out, it doesn’t cost $40+ to relight it.

Anyway, I understand my furnace much better now. It was the first time since we had it installed a dozen years ago that I’d opened it up to see how it works.

Macbook And IPhone Upgrades

aren’t what they used to be:

For the first time in my life, I decided to sit out an upgrade cycle and buy the older model, now being sold at a discount like day-old bread.

I won’t say that the discount played no role in my decision. But in previous years, I’d have swallowed hard and handed over the money, because I am, in the laptop world, a hardcore power user. I game on my laptop. I frequently have a dozen or so applications open, two or three of which are browsers with many tabs open. Faster processors, more memory — these things are sufficiently valuable that I’m willing to pay for them, because they make me more productive.

The trouble is, the upgrade cycle is no longer delivering those things. The processors in the latest model were marginally faster than in the previous one, but you couldn’t add memory, which I needed more. Instead, Apple is focusing on things I care about a lot less, like making the laptop thin — even though that meant losing USB and SD card ports that I still use, and losing a lot of “play” from the keyboard. As a friend pointed out to me, Apple has become obsessed with thinness to the point of anorexia.

But my decision is not primarily evidence of Apple making poor design decisions. Instead, it’s a lesson in the limits of the form — and the way that’s affecting upgrade cycles, and very probably, Apple’s future revenue.

…My 4.5 years is actually on the low side for replacing a computer; the average now is nearly six years, which of course means that a substantial number of users are waiting longer than that. For replacing mobile devices, too, consumers are waiting longer, in part because phone companies are no longer subsidizing the phones to get you to invest in a contract, but also, I suspect, because devices are just not getting better as fast as they once were. We used to upgrade our phones every two years because the new operating systems ran on old phones as if they’d been given high doses of valium. Now we’ll wait until the batteries won’t hold a charge — and if it were possible to replace the batteries, we might wait even longer than that, because I’m not willing to pay hundreds of dollars to get a better camera while losing my headphone jack.

I replaced my slider Droid 2 Global a couple years ago, when it started to flake out, with a used Droid 4, because it was the newest phone in which I could still get a mechanical keyboard. The Droid 2 could do a battery swap in ten seconds; Motorola says not to replace the battery in the 4, but it was on its last legs when I bought it, and they could be purchased at Amazon, and didn’t really require any special tools other than a #5 Torx driver, so now the battery is fine. I don’t know when I’ll upgrade the phone, but then, I only use it when traveling, because I hate cell phones in general, and work at home with a land line, that they’ll take away from my cold dead fingers.

And I’ll stick to my desktop for now as well. I buy a cheap laptop for traveling, but to the degree I’m a power user, I prefer to have something easy/cheap to upgrade (I’ll probably double my RAM to 32G for Christmas). My next laptop, which may come soon, because mine is starting to have problems (occasional non-responsive keys, and lines in the display) will probably be a foldable two in one, that will be much easier to use on a plane.

As she says, it is a problem with marginal utility as we approach the end of Moore’s law, and the limits of the physical human interface.

But it’s not just that. I’ve never used Apple products, and things like this insane obsession with “thin” to the exclusion of all else is one of the reasons. My sense is that Apple’s response to consumer demand is similar to Twitter’s:

“Hey, we’re going to improve the product!”

“Great, want to know what we want?”

“Absolutely not.”

Rogue One

…makes white guys the enemy of the future. Of course, it’s coming from people who think they’re the enemy of the past and present. But Christian Toto liked it.

I haven’t seen it yet.

[Sunday-morning update]

The problem with Star Wars.

I’ve never been a huge Star Wars fan. It’s not really SF, or at least not hard SF. The effects were great for their time, but for my generation, 2001 is the touchstone.

Life Extension

Mice have been reprogrammed to partially rejuvenate.

Faster, please.

[Update a while later]

Here’s more, from Scientific American:

Kaeberlein says the study suggests it may be possible not just to slow aging but to actually reverse it. “That’s really exciting—that means that even in elderly people it may be possible to restore youthful function,” he says. Plus, it is easier to imagine a treatment that makes changes to the epigenome than to consider going into every cell and changing its genes. He also notes that the results of the new study are very similar to those seen when senescent cells—those that have lost function due to aging—are removed from an organism. It is not yet clear, he says, whether “this is another way to shut down or maybe reprogram senescent cells.”
Manuel Serrano, an expert on senescence at the Spanish National Cancer Research Center in Madrid, was not associated with in the new research but says he is impressed with the study and its results. “I fully agree with the conclusions. This work indicates that epigenetic shift is in part responsible for aging, and reprogramming can correct these epigenetics errors,” he wrote in an e-mail. “This will be the basis for future exciting developments.”

Let’s hope.